King Of Prussia & Bryn Mawr

CoolSculpting Elite

Introduction

Body Sculpting with CoolSculpting in King of Prussia

Dr. John Lee is the #1 Coolsculpting Elite Provider in the Philadelphia Region and TOP 3 in PA!

CoolSculpting® Elite, often dubbed fat freezing, is the world’s most popular method of non-invasive fat reduction. Stubborn bulges that resist diet and exercise are no match for this revolutionary body contouring treatment. CoolSculpting® Elite effectively targets belly fat, love handles, thigh fat, double chins, and other notorious fat deposits that cling to the body and compromise the confidence we have in our physical appearance. If you are interested in getting a CoolSculpting Elite treatment in Bryn Mawr, King of Prussia, and the greater Philadelphia area, please schedule a consultation at Lux Skin Lasers and continue reading below.

What is CoolSculpting Elite?

Many people have stubborn fat despite diet and exercise. CoolSculpting Elite effectively targets fat cells underneath the skin without damaging the skin or surrounding tissues. Treated fat cells are frozen and then di inn the weeks that follow, the body naturally processes and eliminates these dead fat cells.

Fat freezes at higher temperatures than water. Think of putting a stick of butter into the fridge compared to a bottle of water. The water gets cold, but the butter gets hard. CoolSculpting® Elite uses this philosophy. The fat-freezing process, known as Cryolipolysis, begins by positioning an innovative applicator over a stubborn bulge. The applicator draws subcutaneous fat cells towards the surface, exposing the bulge to controlled cooling.

Because skin cells consist primarily of water, controlled cooling penetrates the surface to freeze fat cells without harming the skin or surrounding tissue. Once frozen, the body’s lymphatic system processes fat cells as waste.

OUR CENTER IS A TOP 100 (out of over 40,000) PROVIDER OF ALLERGAN™ (MAKERS OF COOLSCULPTING®) IN THE US!

A close-up of a person holding a light gray/white medical device with a blue band and logo. The person, wearing a black V-neck top, has dark brown hair and light mauve-pink nails. The background features a light-colored wall with vertical slats or blinds, hinting at a medical office or clinic setting. - Coolsculpting elite in King of Russia, PA

What Are the Benefits of CoolSculpting Elite?

Our patients who have received treatment from CoolSculpting Elite in Bryn Mawr, King of Prussia, and the surrounding Philadelphia area have enjoyed its long-lasting impacts and a boost in their self-esteem. Common benefits include:

  • Convenient, 35-minute treatments
  • There is little to no recovery downtime
  • Natural-looking results
  • Non-invasive and non-surgical
  • 25% reduction in fat after one treatment
  • Safe and FDA-approved procedure

Who Are the Best Candidates for CoolSculpting Elite?

CoolSculpting® Elite is one of the most versatile and comprehensive fat reduction options. Lux Skin & Lasers can target stubborn bulges that cling to nearly any body area with a full line of fat-freezing applicators. This non-invasive procedure is designed to improve body contours. Most adults who can “pinch an inch” in the stomach or areas mentioned above are good candidates; however, patients should not expect weight loss from their CoolSculpting® Elite treatment series. What can be expected from this treatment is a boost in self-confidence and appearance. Ideal candidates in Philadelphia will be those who want to target fat in the following areas:

  • Back
  • Backs of the arms
  • Bra roll
  • Chest fat (ideal for men with moobs or man boobs)
  • Chin (double chin) and neck fat
  • Flanks, or “love handles.”
  • Have no underlying medical conditions
  • Maintain realistic expectations
  • Stomach/belly fat
  • Thighs  (both inner thigh fat and saddlebags)
  • Under the buttocks (upper thighs)

What’s the First Step?

The first step in getting CoolSculpting treatment in Bryn Mawr, King of Prussia, or the surrounding Philadelphia area is to schedule a consultation with one of our providers at Lux Skin Lasers. During your consultation, your provider will ask you about your medical history, target areas, body contouring goals, and any concerns or expectations you might have for the treatment.

Your provider will assess if you’re a candidate for treatment and develop your personalized treatment plan. Personalized treatment plans include how many CoolSculpting® treatment sessions you’ll need to see your desired result.

You need not do anything special to prepare for your CoolSculpting® Elite treatment. Because the body works to eliminate the fat targeted during treatments, drinking plenty of water before your treatment is beneficial. Patients should aim for at least 70 to 80 ounces of water each day.

procedure-first-step

What to Expect on the Day of CoolSculpting Elite Treatment

On the day of your CoolSculpting Elite treatment in Philadelphia, your provider and the staff will welcome you to Lux Skin Lasers and settle you in our state-of-the-art treatment room. Your treatment plan will be reviewedife you have any additional questions or concerns. This treatment does not require an anesthetic. However, the provider applies a thin sheet of fabric over the skin before beginning the procedure to prevent discomfort and damage to the skin.

To perform CoolSculpting® Elite, the provider applies a small applicator over the target area. This applicator has suction that pulls the tissue in and secures it for the duration of the procedure. As the temperature is adjusted on the device, sensations change from tingling to minor aching to numbness. This all happens within a few minutes. Once numbness occurs, it remains until after the treatment is done. Lux Skin & Lasers is results-driven and strives to go above and beyond. They massage each area for three minutes following the treatment to help achieve the highest efficacy. Massaging the treatment area is vital to the success of the procedure.

Over the following weeks, the body naturally processes and eliminates these dead fat cells. Treated fat cells are gone for good!

Each CoolSculpting session is around 35 minutes in length.

CoolSculpting Elite Recovery

There are very few limitations after CoolSculpting® Elite. We suggest moving the body after fat-freezing sessions, which helps the body process unwanted fat and relieves mild side effects more quickly.

Avoid tight-fitting clothing. Leggings are acceptable as long as the fabric is flexible. Tight jeans and restrictive clothing may be uncomfortable due to the mild swelling.

CoolSculpting® Elite improves body contours by causing crystals to form within fat cells. The body can metabolize and flush the destroyed fat cells for several weeks. While some patients notice a difference in their shape after a few weeks, others do not see much change until at least a month later.

After one CoolSculpting® Elite session, the body processes and eliminates fat for about 12 weeks. Subsequent treatments enhance the fat-reducing effects.

procedure-cost

How Much Does CoolSculpting Elite Cost in Philadelphia, PA?

The cost of CoolSculpting Elite in Bryn Mawr, King of Prussia, and the greater Philly area is determined by the size of your treatment area and the number of cooling cycles necessary to obtain the desired results. Therefore, final prices vary per patient. We recommend you schedule a complimentary consultation to learn what CoolSculpting® may cost. Our prices start at $600 per treatment or cycle. Package discounts and financing options are available.

Why Choose Lux Skin Lasers?

 

Lux Skin Lasers should be your choice for your CoolSculpting Elite treatment in the greater Philadelphia area because of the combined experience of the providers at this practice. You are sure to have professional experience and high customer satisfaction.

CoolSculpting® Elite is a technique-sensitive procedure. Therefore, your experience and results rely heavily on the skill and expertise of the person performing your fat-freezing treatment. At Lux Skin Lasers, our body contouring technicians are extensively trained at CoolSculpting® Elite University, have vast experience performing the procedure, and prioritize the well-being and satisfaction of our patients above anything else. We know our commitment to providing the best standard of care makes a difference in the lives of our patients, and we will continue to do everything possible to guarantee you love your time at Lux Skin & Lasers as much as you love your slimmer, more sculpted physique.

CoolSculpting Elite FAQ’S

5.0 – 301 Reviews
  • CoolSculpting

    “Nicole is absolutely amazing! I’ve received a few cycles of CoolSculpting Elite and every experience was great. The room is clean and she makes the experience super comfortable. Very knowledgeable as well. She’s helped me achieve long time body goals and I’m forever grateful! 10/10”

  • CoolSculpting

    “I have had great results from cool sculpting—got back in a bikini in my 50’s! Very professional and supporting staff, from start to finish.”

     

  • Great Listener

    I have been seeing Dr Castelli at Lux for some time. He is a great listener and the final result of any treatments always exceeds my expectations! He is honest and gentle and cares about his patients. I highly recommend him for injections and/or weight loss!

  • Gave me hope!

    Dr Castelli gave me hope! It’s so encouraging to know there are things he can do to take away some of the signs of aging & I felt so comfortable with him. He was professional yet still friendly & personable, as were his assistants. He explained everything clearly & made suggestions that fit my needs. I am so excited to move forward with all of my skin care concerns.

Schedule a consultation

Find out if fat freezing is right for you by scheduling a complimentary consultation with Lux Skin Lasers, the leading CoolSculpting® Elite PA provider. Call 484-322-5316 today or fill out the appointment request form on our contact page. Our practice serves the King of Prussia, Bryn Mawr, Main Line, and the surrounding areas of Philadelphia.

Schedule Now

Call Email Results